Linocut in Progress: Starting another one!

Step 1 printed

There are sure signs of spring here on the Maine coast. While the weather remains erratic, and there is still snow on the ground, we are also enjoying more daylight and the tuning-up of the avian chorus. "My" chipmunks came out of their cozy dens this past week and are tearing around the yard and the wood pile in a frenzy of activity. 

There is promising news on the vaccination front, as well, and light at the end of the long, dark tunnel that has been this pandemic. Tentative plans are being made for summer workshops and exhibitions, which I find to be a huge relief. 

And, hey! Not to brag or anything, but my 2020 taxes are all calculated, paid, and filed. (With help, of course, from my fabulous accountant!)

With all that optimism I found myself more excited about starting a new linocut than I have been for a long time, so here we go! 

I told myself I was going to stop obsessing about this 3:1 proportional format for a while, but that only lasted for the duration of the plover print. This time, however, I have turned the composition in a vertical rather than horizontal aspect, creating a 24" x 8" image.

That decision has led to a couple of minor challenges... most notably the mechanics of carving. Twenty-four inches is a long way to reach to carve the top of the block, and a bit awkward on my drawing table. I've been alternating standing up at the drawing table with turning the entire block upside down and sideways. 

And of course these long, skinny things are even harder to photograph in my questionable lighting situation, so keep in mind that this first printing stage was not a blended ink roll. It's a flat, transparent, ochre-y color. Top of the photo is a pretty good representation, but you should ignore the bottom.

Unfortunately I don't have a photo of the ink rollout, because I was doing this print pass at 4:00 am (!!) and just didn't think of it. We had a big wind storm earlier this week, and the roaring sound buffeting my house was not conducive to sleep. I gave up, got up, and had this color pass done before breakfast. 

Reduction linocut in progress, Step 2 rollout

Step 2 printed

Bird geeks might have already identified the species that is the subject of this image, even with the limited amount of information available in the first color pass. If not, well, the second pass isn't going to do much to help you. But don't worry... it's more fun to try to figure it out as we go along, isn't it?

You might notice a difference between the color of the ink in the rollout above and the color as it appears on the print. I've warned you about poor photography, but that's not the entire explanation. See how transparent that turquoise-y color is on the glass? Remember that it was printed on top of a more yellow ochre-y color... and then ask yourself, "What happens when you mix sort-of yellow and sort-of blue?" You get sort-of green, of course! 

The reason for this greenish color will, I hope become more clear with the next color pass. Then again it might not. That's just how things roll around here. 

I hope to make some good progress on this piece through the weekend, since I have a commitment that will take me out of the studio during much of next week. There are a few important exhibition deadlines looming, so I'd like to finish this before the end of the month to see if it might be a contender. 

In the meantime, I hope things are looking brighter where you are, as well. Stay the course, stay healthy, and.... (ahem) press on!

Finishing the Piping Plover!

Alrighty, then! Let's wrap this thing up, shall we?

This linocut was oh-so-close to completion after the last time I posted; in fact I thought Step 17 would be the final step. But you know how that goes...

Here's the rollup for Step 17. It's a transparent brown-black, applied over every bit of lino that remains on the block. Which, as you can see, ain't much.

Step 17 ink rollup

Step 17 ready to print

Aaaaannnnd.... here it is printed....

Reduction linocut in progress, Step 17 printed

Ugh. It has been really difficult to get a good photo of this piece from the very beginning, and now it seems to be worse. The camera wants to make it all more contrasty than it really is. 

Anyway... This is close to finished. Really close. But not quite. 

It's difficult to tell from the photos, but I felt the bird needed one last smidge of darkest value to pull it forward of the background. And I mean smidge. Eye. Beak. Part of the band around the neck. I needed to nudge those shapes, and only those shapes, a wee bit darker.

So of course I cut a ridiculously tiny mask and hand-inked these shapes.

Final details of the face

I'm not even sure you can tell from this photo, but there is a slight difference in value and color temperature... the last dark bits of the face are a bit cooler. It might seem like no big deal, but for me it made a difference in the overall feel of the image.

Here's that last hardly-can-be-called-a-color-pass printed. It's a fair photo of the final image, although the dark shapes all appear a bit too dark. (This photo can be embiggened slightly if you click on it... )

Final image.... but what is the title? Hmmmm.
Reduction linocut, 12" x 12," edition of.... 18, probably. 

All the prints are now happily drying away on the rack in the studio (waiting for me to give them a title), and I am turning my attention to the next potential piece. I've got a subject for my Underfoot series in mind, but I have some upcoming deadlines that will call for birds or other wildlife, so I need to find one more bird image to work on first. I think it's a fair bet that I will try to do something without so many subtle grays! Maybe something bold and bright? We'll see!

Linocut in Progress: Is the end finally in sight?

Well, yes... we are headed towards the finish, but not quite there yet. This piece has turned out to be one of those learning experiences that we both celebrate and lament. It's taking SO LONG to finish what was intended to be a "simple" composition. Just goes to show ya' that apparently simple is not the same as actually simple. 

By now we are at, what? Step 14, I think. This was a transparent warm gray that was rolled over the entire block. It influenced sand, bird, and background simultaneously.

 

Reduction linocut in progress: Step 14 printed

Okay, well, that's something. I think the sand is finally finished... mostly. I want to suggest little footprints moving into view from the lower left, so material for that needs to remain on the block, but the rest of the foreground can be carved away in wide swaths rather than tiny chips. Satisfying.

But I need to resolve the background shapes, which I've been making up as I've gone along. It's time to slow down and actually think about it... with a pencil in hand! I took a photo of the current stage of the image, flipped it around in the computer so that it faced the direction of the block, printed it out, and voila! A way to work out some of the darker shapes. 

Resembling a plan...

Keep in mind that whatever I draw in pencil on my mock-up will remain uncarved on the block; it's the lighter bits that will be removed from the lino. This drawing wasn't completely accurate, but it was a helpful guide for sorting out the next carving stage. When the carving was finished I rolled out another transparent gray across the entire block and.... 

Step 15, printed

Okay. Getting much closer to the end now, but still not quite there. I used the computer printout method again to refine the shapes even more. Seems a bit busy now, but it all definitely reads as detritus on the beach.

And yes, I employed the computer printout one more time to sort out the next stage. There's really not much material left on the block and this stage and it's hard to understand what's happening without the printout for guidance.

Step 16 printed. Really? 16? That's a bit excessive, don't you think?

And yes. Another transparent gray. So many grays in this image! I think the footprints are completely done now, so I'll clean them off before putting in what I hope will be the last dark bits. Stay tuned...

Linocut in Progress: Not-so-quick sand

Last time on "Let's Make This Simple Idea As Complicated As Possible," the linocut wrestler decided she really didn't like the dark foreground that had developed in her image. It was an interesting effect, but not really part of the original plan. (As if anything like a plan actually existed. Ha.)

The solution? Get out the white ink and tone that whole mess down.

Step 12 rollup: Yes. That's plain old white ink.

It's important to remember that getting back to "white-white" on an image that already has a number of color layers printed is a difficult proposition. The white ink would need to be very opaque and applied rather heavily... and would have a different quality from the rest of the image. 

Lucky I'm not trying to get back to "white-white," then, eh? Just lighten things up a bit.

Step 12 mask

To ensure that this white pass was confined to the foreground I cut a newsprint mask. (Note how much simpler in construction it was compared to a lot of my crazy masks. At least I kept that simple!)

Step 12 printed: no more dark foreground

Et, voila! The dark foreground is gone. There is, however, an interesting phenomenon happening here, one that is not as alarming in real life as it appears to be in this photo but which should be mentioned. 

White ink in general is more opaque than other colors. For this color pass I did add some transparent base, but the white ink still reflects light differently than all the other previously-printed, very transparent layers. 

In short, it looks a bit chalky. 

I expected some chalkiness, although I was a bit surprised by just how much I got...  but I think it will be fine. A lot of this lightened foreground is going to get another hit of transparent gray-brown color after I remove many more tiny chips of lino, which I hope will add to the feeling of subtle sandy texture. Won't know for certain until I get there, though. 

Foreground managed, it was time to do a little something more with the background. I'm trying to suggest detritus of twigs and trash and eel grass, so I mixed up a sort of greeny-ochre. It looks really yellow in the roll-out, but I promise it's more of a greeny-ochrey-brown. (That's a very technical color name, if you're wondering.)

Step 13 rollup

Clever (or just lucky) me had kept the other half of the paper from the previous mask-cutting adventure, so I had somehow managed to create two masks at once. I did have to augment with some roughly bird-shaped pieces of newsprint, but that was easy enough. 

Step 13 mask(s) in place

Aaaaannnnndddddd...... Here's Step 13 printed.

Step 13 printed

It feels like it's maybe-kind-of-sort-of-possibly getting close now. I might even go out on a limb (or a twig or a piece of eel grass) and imagine I could be done in two more color passes, although more likely three. Okay, maybe four.

The biggest thing I am learning right now is how to take a simple idea and make it ridiculously complicated. Too much, really. My original intent for this piece was a "minimalist" composition. Bird. Sand. Some detritus. Simple. But then I decided to up the ante with a lot of subtle texture in the sand. I could have saved myself from having to print that white pass (I think) if I had been more bold (and patient) about cutting more material out of the foreground earlier, but I just keep inching up on the whole thing. Quite literally... another inch of carved texture, and then another, and then another. Ooph.

It's probably too early to mention this, but there is another sand/bird/detritus image waiting in the wings. (Bird artist joke. Wings. Get it?) I don't think I'm in any danger of jumping into such a piece immediately after this one, but if, say a year from now, you see me start another lino with a lot of gray and the word "sand" involved, feel free to roll your eyes and send me back to this post. 

Back to chip, chip, chipping away....

Linocut in Progress: Surprise! More gray

We aren't up to 50, or even 15, shades of gray yet, but golly there have been a lot of them in this linocut. In fact, here comes the sixth. 

In the previous post I might have mentioned shifting to another little bit of fiddly color, but then I decided I needed to bring some unity to the background... and I might as well add a little more texture to the foreground sand while I was at it. So. Step 9. Surprise! Another very transparent gray. Please try not to snore when you nod off from boredom.

Reduction linocut in progress: Step 9 printed, another warm gray

It might not have been exciting, but it was useful for helping me to visualize a direction for the background. As I lamented in my last post, I'm rethinking the background shapes on the fly, and every little nudge towards some kind of structure suggests what my next steps could be.

Having said that... now is the time to forget about the background and deal with a couple of very small, fiddly bits of color in the bird. The plover's beak is a sort of yellow-orange at the base, as are its legs. I absolutely do not want this very-staining color to escape and wreak havoc over the rest of the image, so I will employ spot inking and a newsprint mask.

Step 10 spot inking

The inking part is easy enough. My smallest brayer is 1" wide, so it leaves some slop around my intended shapes, but inking goes quickly. In fact the most time-consuming aspect of this step was cutting all the newsprint masks.

Step 10 mask in place

Drumroll, please...

Step 10 printed

Okay, it's nice that my bird has a leg to stand on now. Two of them, actually. The color seems alarmingly bright at the moment, but most of it will be toned down in the next pass of... you guessed it. Gray!

Step 11 rollup. Oh, look. Gray.

As an aside I would like to point out the yellow stain on the block during this gray rollup. I scrubbed and scrubbed the block to remove this color and this was the best I could do. Thankfully the residue is clinging to the carved-out areas of the block and not to the surface. I learned the hard way that yellow ink stain on printable surfaces can transfer to your prints in places you do NOT want it, which can be a disaster. 

Thankfully there were no fussy masks to cut out for this stage and everything went along smoothly. 

Step 11 printed

But the foreground is definitely WAY too dark now, so the next color to print will be white. I'm hoping I haven't left it too long. The white ink will not look "pure" white, but that's just fine. I want to lighten the area, not cover it completely. 

There's carving to do first (more sand... chip chip chip) and drying of ink layers, so it will likely be a couple of days before I can print again. Stay tuned... I promise a bit more drama after the white pass. Honest! 

Linocut in Progress: Hey! That's not gray!

Long-time followers of Brush and Baren know that planning, at least in terms of linocuts, is not one of my strong suits. In the early days of my printmaking adventures, however, I would at least think about my image and make a list of colors to be printed and the order in which printing would happen. Sure, I'd usually throw that list out after step 3 or 4, but at least I put some effort into thinking about it.

Lately it seems that my planning stops at composition. Is my drawing on the block? Good enough... let's start printing! 

It could be argued that my non-system is working, since I do usually get to the end of a piece in a satisfactory way. But, geez, do I cause myself excessive amounts of angst.

This time I've really gotten myself into a pickle, though, because I've decided to change something about the drawing. Yes, after I've done a boatload of carving I'm going to try to "retrofit" an object into a shape that was meant to represent something else. 

I'm not going to say much more about the change at this point, because I haven't really figured out how I'm going to do it, and the entire idea may just fall apart before it gets very far. 

In the meantime... look at this nice blue-that-isn't-gray! Purdy, ain't it? This is color pass... hmm. Seven already? That seems a bit ridiculous, but here we are. 

I didn't want this blue everywhere, so I inked just one section of the block. The previously-printed color was still a tiny bit tacky on the prints, though, so I made a newsprint mask to prevent damage from the un-inked portion of the block.

Step 7 mask in place

And here we are. Blue blob in gray universe with purple-bellied bird. Having trouble picturing the end result? I'm not surprised.

Reduction linocut in progress: Step 7 printed

The blue is nice, but let us confuse the issue a little more by adding another non-gray color to the mix. How about a sort of light ochre? These blobby shapes behind the bird are beach detritus, mostly dark seaweed and eel grass, but with a few twigs and other things mixed in. Ochre could be a nice twig color. 

Step 8 spot ink

Again I want to contain the color, so I cut a mask to fit in the top portion of the block. Initially I tried to print the ochre right after the blue, but the newsprint mask stripped off the freshly-printed blue ink, so I had to stop and wait a day or two. 

Step 8 mask

It's both amusing and annoying how the addition of the ochre color changes the way the camera reads the color balance. I've tried to adjust the balance in this photo, but the upper background still reads as ridiculously pink. No. It's gray, I promise.

Step 8 printed

So now I have these strange color shapes to contend with. I think for the next color pass I am going to go back to a transparent gray, which I hope will make things feel a little more cohesive again. 

Or not. There's one more little bit of oddly bright color that needs to be in this image and now may be the time to do it. Hm. Could be a fiddly bit of inking, though. I might have to make... a plan!

Linocut in Progress: It's not a demented chicken!

Let me start this post by stating, for the record, that if I decide to do another linocut with a preponderance of subtle grays any time soon, you all have my permission to suggest (in the kindest, yet most firm way) that I might be helped by professional psychiatric evaluation. 

The two color passes I am about to share with you are both gray, and I think there are at least two more gray passes to go. The changes are so subtle you might wonder what the point is... and you would not be wrong to do so. I'm not entirely convinced I know what the point is, either. But onward we go. 

Step 4, you may or may not recall, was a strange purple shape, spot inked and masked on the block. Let's put it here again as a reminder, shall we?

Reduction linocut in progress, Step 4 revisited. 

I think it's going to be important to have that image close by for comparison when I show you Step 5, because, as I mentioned, it's gray and it's subtle.

Step 5 printed

See what I mean? If you look carefully you will see some changes in texture creating a bit of light-to-dark gradation from top to bottom of the image. This could be done with a blended ink roll, but our little avian hero is standing in an expanse of sand and I thought it could be nice to suggest that environment. The trouble with that decision is that I have been doing a lot of time-consuming chipping out of tiny bits of lino for not a lot of visual reward. But I'm going to stay with it a while longer... because now that I've started down this road I just have to see where it goes. 

(Keep this attitude in mind, anyone invited to "come take a walk" with me. You might want to be sure you have snacks and water and emergency flares in your daypack.)

Anyway... you might also notice some subtle changes in the shadowed face and belly of what is now more clearly a shorebird and not the demented chicken suggested by the shape of the newsprint mask cut for Step 4. 

On to Step 6! Which is... drumroll, please.... gray! How exciting. 

Searching for the right gray

As I prepared to print Step 6 I had a boatload of angst to deal with. In the "real world,"–in natural, non-contrasty light– the gray back and head of this bird lean toward something a bit warmer than what I'd used so far. The cooler grays are okay in the shadows and the brightest areas, but I needed to nudge the overall color temperature just a bit. That was Problem 1.

Problem 2 was (and will be for a few more color passes) the question of the sand. It's already become a little darker than what I ultimately I want (I think), so should I cut a mask to isolate the next color in the bird, or should I let the new color print over the foreground? For more cohesive color over the entire image I absolutely wanted to include this new gray in the foreground, but the darker value had me concerned.

In the end I decided to print a lighter gray than originally intended (hence the need for a least two more gray passes after this), print it in the lower 2/3 of the image, AND probably print white over the foreground in a later pass. 

Does your brain hurt yet? Mine does. 

After all that nail-biting, here's where the image stands now.

Reduction linocut in progress, Step 6 printed

By golly, this is feeling pretty okay now. The purple-y shadow shape, which seemed so obnoxious when printed, is now reading much better. There's a nice sense of light developing in the bird, and the foreground remains subtle. 

It's probably time to turn my attention to those background shapes now. There is a part of me that really wants to hurry up and finish the bird, but the value and temperature of the remaining grays is going to be strongly influenced by whatever I do with the background, so I'm going to have to rein in that impulse and focus elsewhere for now. 

In the meantime... any guesses about the identity of our subject yet?

Linocut in Progress: Subtle... and strange

Work continues, in fits and starts, in the studio. Focus is still elusive, but in part this is because the beginning of a new year tends to have a lot of activity to distract me! Tedious things like year-end bookkeeping, but also fun things like the 121st Christmas Bird Count. The CBC was, of course, different this year with virus protocols in place. I spent the day by myself, surveying a subsection of the territory I usually cover with a group of friends, and sent my results via email rather than gathering with all our counters at the end of the day.

But we had good weather for it... some sun, not too windy, not too cold... and I was able to cover more ground on foot than usual. I didn't find anything out of the ordinary, but it was nice to be out and about.

Step 3... more gray!

Back in the studio the color palette and progress on the current linocut remained subtle. Gray, gray, gray. It's difficult to tell what's happening yet, but if you use your imagination you might be able to find hints of the main subject. (Yes, of course it's a bird, silly.) 

Reduction linocut in progress, Step 3 printed

And now... hm.

All the hard thinking of this image seems to be happening in the early stages. The foreground needs to stay a fairly light gray, but I don't want it to be flat and boring, so I have been carving lots of tedious little dots... stippling, as one might do in a pen and ink drawing.

But the hero of my image is also gray. Gray on the back with a white belly. (And a few other white areas.) The tricky thing is that most of the white areas are in shadow... AND the shadowed white area is darker than the sun-lit gray area! What the heck color should I print the underside of the bird so that it reads as "shadowed white" rather than just another gray? Ooph. 

First things first, though. I think the decision about the shadowed-belly-color needs to happen now, and it needs to be contained. There can be some of the shadow-color influencing the bird's wing, but not its back... so it's time to cut a mask.

Cutting newsprint masks

The strange shape of this mask makes me laugh. I can't decide if it looks like a demented chicken, or maybe it's a hamerkop. Look at it on the block! Definitely hamerkop.

Mask in place on the block

It took a couple of tries to get to a color that I liked, and I'm still not entirely sure this is the right one, but I'm going to carry on and hope it works. The advantage for you is that you can at least see where our hero is standing, even if you can't quite identify the species yet. Or maybe you can. Any guesses?

Reduction linocut in progress: Step 4 printed

From here I think I will have a few days of chipping out tiny stippled dots in the foreground. I will also remove material from the belly and face of the bird to preserve that strange purple-gray color. What, me nervous? 

As for the next color... I think there's one more pale gray pass and then I can get going with what I hope will be the more entertaining bits of the background.  Stay tuned!

Linocut in Progress: Rolling in(k)to the new year!

Wow. It has been a while since I've had photos like these to share. YES... there are fresh lino chips on the studio floor... YES.... there are sheets of paper hanging on the drying rack. YES. This is ink rolled out on the slab.

Yes. I have a new linocut in progress. 

Step 1 rollout

As usual, the early stages are subtle. For Step 1 I only had to carve two small areas, and then I rolled a pale transparent gray over the entire block.

Reduction linocut in progress: Step 1 printed

I was amazed that things went so smoothly for this first color pass, especially after a rather protracted period out of the studio. I had zero issues with coverage or viscosity... the only adjustment I had to make after I pulled the first print was to lighten the color a bit. (In the top photo you can see my first gray all the way on the right, and the one that I ultimately printed is on the left. That dark one in the middle... never mind about that. Pretend you didn't see it.) 

The tricky thing about this piece (well, I think it's going to be ONE of the tricky things about this piece) is that most of the image area is going to be subtle, pale grays. The main focus will be in the the upper third of the space. Compared to a lot of images I've worked on lately it seems to be quite simple... even a bit minimalist. Except you know me. I really doubt I'm going to be able to keep it simple. 

In fact I've already started making a bit of trouble for myself by adding some texture and temperature changes in the second pass. Probably you won't be able to really tell on a computer monitor, but the second color pass is a blended roll, from a cool gray to a warm gray. Both very light and very transparent. There's a little bit of texture happening right along the edge of the top third.... and there will be more of that as this progresses. 

Unfortunately I don't have a photo of the rollout for Step 2, but here it is printed.

Reduction linocut in progress: Step 2 printed

Although the temperature change from the blended ink color isn't very obvious, you might see that this particular print had a little bit of the dreaded "Sharpie bleed." After I transfer my drawing to the lino I usually draw over it with a Sharpie brand permanent marker. The Sharpie drawing will hold up through multiple inking and cleaning stages, but sometimes it also will bleed back to the prints during the first color pass. I thought I had avoided that this time... After I made the Sharpie drawing I sanded the linoleum and cleaned it with a citrus cleaner. It was mostly fine, but a couple of prints did show some transfer. No big deal, this will all be covered up in subsequent color passes, and as an extra measure of "safety" I moved the Sharpie-bled prints to the front of the printing queue. This makes them first in line for mistakes on subsequent color passes.

So! Things are moving again, albeit a bit slowly. The next stage COULD have gone really quickly if I had decided to keep the background simple... but, let's say it together, "Oh, nooooooooooooo. Why would I want to keep things siiiiiiimple?" Instead, let me embark on what can (in a G-rated blog post) be called a boatload of tiny detail carving. Because it might be a new year, but some things never change. 

What's-It-All-About Wednesday! "Dinner Party"

 

"Dinner Party," reduction linocut, 18" x 18", edition of 18

Well, hello there! I'm a little bit leery about making the following statement, a little superstitious about "jinxing" things, but I think I am finally coming out of the long, dark tunnel that has been the last few months. 

In a making-art-for-a-living life there are always ups and downs. Ideas, and enthusiasm for them, wax and wane. But this year? Wow. This year there has been a whole lot of wane. 

The good news is that I've started to kick around some new ideas and putter around in the studio again. In fact today I started to draw up a new lino and prep the paper for it. That hasn't happened in a while. 

There's nothing yet to show for the effort, however, so while I'm stirring that particular pot I thought it would be nice to thaw out the periodic "What's-It-All-About Wednesday" posts. And since I've been seeing a lot of buffleheads around lately... well... let's take a look at Dinner Party.

This piece is a couple of years old, but it remains a favorite. Two pair of buffleheads have come together to ride the swells and search for a meal; in fact one of the females has already found a tasty appetizer. 

Small and feisty, buffleheads are constantly in motion. Back in Colorado I always had a heckuva time deciding exactly how many buffies were overwintering on my local pond, since I could never be sure I was seeing all of them on the surface of the water at the same time. Pop up! Down! Up! Down! Constantly.

It's challenging to suggest all that busy-ness in the sort of stop-motion view of an image on paper, but I tried to do so by ramping up the color and texture of the water and by giving the birds very alert postures. They could all dive back down to the underwater buffet line at any moment. 

Interestingly (I think), buffleheads are cavity nesters. That's right. A bird that spends all of its time on and in the water... raises its young in holes in trees. And if you've never watched day-old ducklings leap out of a tall tree... well. You owe it to yourself to spend some time on YouTube, at least. 

Because they are so small they can (and do) take advantage of old flicker holes, and they will also use nest boxes. Here in the United States most of us have to be content with seeing them only in the winter, however, as the bulk of their breeding range is in central and western Canada, up in to Alaska. But this time of year you should be able to spot them in fresh or salt water across the entire lower 48 and down in to Mexico. In fact, I've been entertained by a number of rambunctious dinner parties in my Maine neighborhood recently, both off the coast and on inland ponds. 

It's been a while since we've been able to engage in similarly energetic human parties, but those precious gatherings will return. And when they do, I imagine they'll feel just as celebratory as a gathering of buffleheads. 

It's an... updated website!

 Yes, I know, I've been away too long. Blame it on a dumb ol' virus that's been messing with my motivation to get in the studio.

But all is not lost! I've been working on other projects, including the redesign of my website! Hooray! It's a bit overdue, and I'm glad to finally have it up and running. I hope you'll take a few minutes to pop over to sherrieyork.com and check it out. Thanks!