Thursday, November 19, 2015

Linocut in Progress: The end of the end

Sometimes the simplest things can give you the biggest problems in printmaking.

After spot-printing those funny shapes of lightest green I did a bit of carving and then printed a transparent mid-value green blended to a darker blue-green. The transparent nature of the colors meant they interacted in interesting ways with the odd color shapes below them.

There was one spot that I wasn't too excited about–it developed a harsh color line rather than a smooth transition. Also, I had masked the bird to keep the greens out of it and now it looked purple. I was happy with the variety of darks, though, and relatively sure I could fix the other issues with the next pass.

"Fleeting" reduction linocut, Step 13.

Aaannnnnd... that next pass was a straightforward transparent green-brown made from scraps of previously-printed colors. Simple. (Ahem.)

"Fleeting" reduction linocut, Step 14.

It looks fine here, but this "simple"color pass gave me a some trouble. I had to leave town for a couple of days in between this step and the previous one, which meant that the prints were too dry when I returned. As a result I didn't get good adhesion on this color pass. I ended up running the same color twice on all of the prints to get what I wanted. Ugh.

Tedious, but successful. The greens are now less bright, the hard edge I was worried about has gone away, and the bird has a little more color to it. (Not purple.)

All that was left (I thought) was the final dark for the marks on the tree trunks and some of the branches. Not quite a straight black, but close.

Unfortunately the near-black that was good for the trees was bad for the bird, so I wiped that color away from the bird before printing.

"Fleeting," reduction linocut, Step 15.

Of course now the bird felt a little bit too light. I wanted it to remain subtle... a sort of surprise for the viewer who comes close and discovers he or she is not alone in the forest... but at this stage it looked too insubstantial. So I mixed a more transparent blue-gray and tried to print only the bird by masking out the rest of the block and running it through the press.

Usually this works fine, but since the blackish color had been printed mere minutes before, the mask intended to protect the prints instead stripped the black off. (sigh) I expected some stripping*...  but not quite as much as I got. Again, so much for "simple."

(*Stripping: If you want to remove excess ink from prints, place a sheet of clean newsprint on your block, place your print face-down on the newsprint, and run the whole stack through the press. You can do this with hand-rubbed prints, too, and you don't necessarily need to include the block.)

In the end I ran the over-stripped prints back through the press to fix the dark and then carefully hand-rubbed the bird's final color on every print. Ooph.

"Fleeting," reduction linocut, Step 15.5... and final.

The difference in the bird is probably too subtle to see in a web image, although I think all of the steps on this post are embiggenable, so you might be able to tell if you click on them and view them larger.

Whew! Glad this one is finished, as it's due for a big exhibition. As is often the case, it doesn't look much like what I envisioned, but I'm still pleased with it. It was the dense tangle of many tree trunks that motivated me to chase after this image... but it was the intricacies of the background that were the most challenging.

And speaking of challenge... I just received in the post a small wooden, silver-painted block on which to create an image for Abend Gallery's 25th Anniversary Holiday Miniatures show. I'm going to try to print on it... somehow. But first I have to decide what the image is! And of course it needs to be back in Denver next week... dry enough to ship and hang. Guess what I'll be doing the next few days. No rest for the wicked weary.

5 comments:

  1. ***Applause*** well worth the hand-wringing and extra steps. This print is exquisite! And I love the idea of the 'surprise' bird.

    Great tip about the stripping too. I can see that happening in my not too distant future as I am soon to be grappling with collagraphs. Thank you.

    ReplyDelete
  2. Sherrie, while you seemed to struggle with this one, the outcome is fabulous! The greens look so far back, wonderful depth and just perfect complexity! I too love the bird reward! xoxo

    ReplyDelete
  3. great finish :)

    you do notice the difference when you see them bigger and switch between them :)

    ReplyDelete
  4. Bird reward! What a great description. I shall have to remember it! Thanks, Wendy.

    Lisa, I'm not sure how well stripping will work with collagraphs unless you're printing them as relief blocks instead of intaglio. (I learned them as intaglio prints.) But maybe! Let me know how it goes.

    Definitely things look different in between the last two images... partly because the VERY last one was taken with my big girl camera, while all the others were just phone shots. But I think it's close.

    ReplyDelete

Linocut in Progress: The Third Act

Time to wrap up this linocut ! And we are wrapping at warp speed (see what I did there?)... because there are deadlines. Exhibition deadline...