Showing posts with label printmaking. Show all posts
Showing posts with label printmaking. Show all posts

Tuesday, September 22, 2026

Trying something new. Or at least different....

Let's just say it: I am in a rut. And I have been for quite a while. I'm not excited about any of the ideas I have for linocuts... they all just seem to be variations on a theme. I'm flailing around, looking for an interesting spark.

Which is why I took a complete detour a few weeks ago and finally made a little TetraPak printing experiment. A what printing, you might ask? It's an intaglio process, like etching... but not nearly so involved as working on zinc or copper with all sorts of questionable materials, because the printing plate is a piece of TetraPak. You might know it as a soup box.

Talk about a low-tech plate!

Unless you've cut open your broth box and peered into its depths, however, you might not have realized that the inside is coated with a thin layer of foil. And that foil can be scratched with a needle, as one does when making a drypoint etching. The foil is, of course, squishier than a zinc or copper or acrylic plate, but if you're not worried about precision, it's good enough!

A little song sparrow, quickly scratched in TetraPak

It's probably been... ooph... 40 years (what!?!?) since I've inked and printed an intaglio plate. Unlike relief printing, which involves rolling ink on to the surface of the plate, intaglio printing requires pushing ink down into the incised lines and then wiping off the surface. A damp sheet of paper will press down into the lines and pull up the impression. 

All of which means that I had forgotten what a mess it can be to ink and wipe an intaglio plate. I definitely need a better system. But here's the inked plate:

Test plate ready to print!

I never did get a consistent combination of inking, wiping, paper dampness, and pressure, but I did get a nice set of experiments.

TetraPak test prints


Intaglio was my first printmaking love, although I learned to make etchings using zinc plates, aquatint rosin, nitric acid baths, asphaltum varnish, kerosene.... you get the idea. It wasn't a process I could maintain without a properly ventilated studio and the capacity to manage all those questionable chemicals. 

Some years ago (decades now, no doubt) there was a lot of excitement around the newish, less toxic process of solar plate etching. I never had an opportunity to learn how to make solar plates, although what little I knew seemed a step removed from the immediacy of drawing a needle across a treated plate to create an image. 

Using TetraPak felt a little more my "style," but I definitely need more practice to achieve any sort of consistency. And the "squishiness" of the foil doesn't seem to give me the control I'd like for making marks. Still, it was nice to take an afternoon to just play around... something I don't give myself nearly enough time for. 

Sunday, September 13, 2026

Wait. Has it really been almost 20 years? A "Brush and Baren" reboot

Contemplating past and future on the Pemaquid River, August 2026

Brush and Baren
began on a whim at Winter Solstice 2006. In the beginning it was a mix of professional and personal reflections... a little of this, a little of that. I named it brush for the watercolor illustrations and sketchbook pages, and baren for the printmaking that I was still doing entirely by hand-rubbing with baren and spoon.

"Content," and my dedication to it, has waxed and waned, as life itself does over a 20-year period. I recently went back and read some early entries... nostalgia coming in waves. Small town mountain life. Travel here and there. Illustration projects. Earliest experiments in reduction printing... some successful, some quite cringeworthy through the lens of time. 

The blog community was vibrant in 2006. People read and responded–a growing number of them as time went on. I made some friends who I still haven't met in person but remain in contact with... although not as frequently as we all once were. 

And now it's September 2026, and I find to my chagrin that I haven't written a single blog post all year.

What the heck happened?

So. Much.

The "social" mediaverse (I think of it as antisocial media, honestly) has become a quagmire of soundbites and artificial creators. Faster, brighter, louder... meaner. Does anyone even read blogs anymore? 

Does it matter?

I didn't expect readers in the beginning, really. Mostly I was stumbling around learning to be an illustrator, an educator, an artist, a naturalist. I was cheered and grateful when some friends came along for the journey. 

But the journey has been a bit murky the last few years, and Brush and Baren seemed to lose its way, along with my focus.

I'm going to try to fix that. I'm not sure if that ultimately means moving to a new platform (Substack, anyone?), but for now I'll keep chattering into the blogosphere, and if anyone chats back, so much the better. You won't often see a baren in use these days... although a spoon does make an appearance for detail work from time to time. I'm not doing as much illustration at the moment, but I've been thinking about re-opening negotiations with brushes (we've always had a contentious relationship). Last year I managed to keep a naturalist journal going for 11 whole months, but never shared any of those pages here. Might be time to start that up again. We'll see. 

All I know is I'm anxious to create a kinder, gentler online community again. Come along, if you'd like. Who knows what we might discover?


Tuesday, July 27, 2021

Coming up at the Wendell Gilley Museum!

Yes, indeed! It's time for live, in-person printmaking workshops at the Wendell Gilley Museum in Southwest Harbor, Maine!

Friday, August 6, 9:00am-3:00pm: Two-color Reduction Printing

Saturday, August 7, 9:00am-noon: One-color Introduction to Relief Printmaking

All materials will be provided! We'll be working with the easy-to-carve "speedy cut" type of block material, so classes will be appropriate for ages 10 and up. Details on the Wendell Gilley Museum website "Events" page.

Saturday, September 26, 2020

Linocut in Progress: Duck duck duck!

When we last left our hero she had just finished a lino and purchased a car. There were a few loose ends... like titles for both the vehicle and the print edition. The automotive title is coming eventually (ongoing pandemic = slower processing time), but the lino got its new name ("Low T'Eiders") and will soon be posted on my website. 

So of course it's time to get something new underway. I had a piece in a long, skinny (3:1) format sketched out before I started the eiders, but decided maybe the world wasn't quite ready for yet another linocut of harlequin ducks. 

And then I decided that although the world might not be ready... well... who's doing the work, eh? Me, that's who. And I am always ready for more harley ducks. So that's what we're doing. Look away if you must.

Reduction linocut in progress, Step 1

This time I thought it would be fun to push the color a bit, a decision which might end up looking great and might end up looking like a disaster zone. But, hey. I run the risk of a very public crash and burn every time I start documenting a new piece... so why not? I started out with a transparent green.

Reduction linocut in progress, Step 1 printed.

Yep, that's green. Could be fun, could be a nightmare. Let's move on. 

Color pass #2 was a bit more predictable... a transparent blue.

Reduction linocut in progress, Step 2 rollup

The printing of this color was straight up and basic... just roll it and go. Because the blue was so transparent it created a sort of... well... a blue-green, of course. 

Step2 printed


For the third color pass I decided it was time to make things a bit more interesting by creating a blended roll. I rolled out a transparent light blue and a deeper transparent blue-violet.

Reduction linocut in progress: Step 3 rollup

Alrighty, then, that seems like a good start. 

Step 3 printed (embiggenable with a click)

Those first three steps moved along fairly quickly, but now things have to slow down a little bit. These birds have bright white markings on their heads and sides, but I want them to appear in a sort of dramatic cross-light, so many of those white markings are in shadow. For this reason I didn't carve all the white shapes away in the first step, but now I need to address them before they become too dark in value. They will be a blue-violet color, which they more or less are right now, but I want them to be slightly different from the blues of the water. 

The best way to do this will be to cut a mask and do some spot inking, so that's where we're headed next.  

Saturday, August 22, 2020

Linocut in Progress: Still in the ugly zone....

Is it just me, or have all the social media platforms decided to change their interfaces at the same time? Blogger, Facebook, Instagram. It seems as though they've all moved the controls, changed the appearance, and simultaneously conspired to cause user irritation. 

Maybe I'm just being ultra-sensitive, because if you follow me on either FB or IG, you know that last week some nefarious human being created an Instagram account impersonating me and subsequently spammed many of my followers. It caused no end of headaches, since it is impossible to reach a real human being at any of these companies anymore. I don't want to rattle on about it, but as a public service announcement I just want to say BE CAREFUL OUT THERE. I never send my readers any private messages asking them to follow links or donate any funds, and I immediately delete messages I receive under the same circumstances. Stay vigilant! 

But enough of the soapbox, let's talk lino. 

There have been a lot of distractions in the last couple of weeks. Between the IG woes, an online course, and a live workshop (my first since last autumn!) studio time has been erratic. But then again, so am I right now. Erratic, I mean. 

So where are we?

Right. We're at Step 6 already! There are four subtle layers of color in the background water area, and in my last post the print had just entered the Ugly Duckling Stage with the application of Step 5. I'm afraid we're going to be in this questionable stage for a while longer, so I hope you've got plenty of popcorn and don't mind a cliffhanger.

Step 6 was a straightforward orangey-ochre applied to over the entire block. It went a little way towards unifying some of the blobbiness that started to appear in Step 5, but not much.

Reduction linocut in progress, Step 6 printed

The seaweeds which cover the intertidal zone all along the Maine coast range in color from a sort of orangey-ochre to an ochery-green to a blue-gray and a green that's almost black. I find these colors really tricky to mix effectively, especially when I'm layering transparent color.

For the next color I mixed a fairly dark, transparent green-black. I wanted to dull some of the rusty orange from the previous pass, and "cool" it down a bit, without getting too dark.
Step 7 ink rollup
The tricky bit is trying to anticipate how colors will interact. On the block this color looked very dark and gray, but on the print.....

It produced a rather nice brown.

Step 7 printed

In general this is all feeling okayyyyyyy..... but I don't like how dark the birds' heads have become. And I want to start developing some of the cooler-toned rockweed that's mixed in with the more ochery bits.

This looks like a job for SOOP-er Weird Color Woman.

How about we roll some plain opaque white over the upper parts of the birds and a nice, somewhat opaque, blue-gray over everything else? That ought to do... something. Right?

Step 8 rollup: Spot ink white and blue-gray

Well. It's definitely done... something.

Welcome to the Ugly Duckling Stage, Part 2.

Step 8 printed. Hmmm.

Believe it or not, I'm actually not panicking at this point, although maybe I should be. There's a bit of wet ink glare in this photo, so it's hard to tell, but I am happier with the birds' heads. Not much of the gray color will remain in the final image, I don't think.... but it has put down an interesting base and will create some nice highlights in the darker rockweed to come. Well, that's the theory, anyway!

Thursday, July 30, 2020

Linocut in Progress: It's all heating up...

And I mean that quite literally. It is HOT here on the coast of Maine just now-- the kind of heat that makes this formerly-of-the-high-desert printmaker wonder what she was thinking when she moved to a place where 90-degree temps can be accompanied by equally high humidity levels. To make matters worse... it just doesn't cool down at night. Back in Colorado we might have 100-degree days, but at least I could always be sure that once it got dark I could cool the house down and be ready to meet the next day's onslaught.

Here? Not so much. And I am cranky.

But I'm trying to work, despite doubts about how ink and paper behave in these conditions. It's slow going, since I frequently have to stop to wring myself out, but at least I'm trying!

I'm back to a square format for this piece; and although it will have a few of my usual subject elements (birds and water, of course), there will be a twist of complexity in the foreground that I am both intrigued by and nervous about.

But to get started, here's a soft blue in the background.... not over the entire block, it's not needed everywhere.

Linocut in Progress, Step 1

Not much information there, but that's okay. Let's try to keep some suspense going for a while. 

The second color pass was a blue-to-green blended roll, again just in the upper half of the image.

Reduction linocut in progress, Step 2

It was all feeling fine at this point, but I started arguing with myself about whether or not I should be masking color out of the foreground, since the color temperature of the bottom two-thirds of the image will be much warmer than all the color that's been printed so far. My concern is with the interaction and influence of the already-printed color and the color-to-come, but I am too hot to think clearly and my brain cells are dripping down my back along with the rest of me. 

It is, however, quite satisfying to see my studio look as though there is something happening in it again. And look above my drawing/carving table! Can you see that all my carving tools are now in a nifty little rack attached to my shelf? You can thank my friend and neighbor, J, who has a lovely habit of taking an idea vaguely described by me and making it appear as if by magic.

Studio view... so nice to be working, even if I'm melting
and the paper is curling.
Sooo.... studio view and sweltering heat aside, I think I can manage one more color pass for the upper third of the image. This time it's a sort of gray-blue to lavender-blue blend... and, surprise! Some of the subjects are starting to be revealed.

Reduction linocut in progress, Step 3

It's time to make yet another pitcher of iced tea and check on the status of the ice cube trays, and then it's back to the carving table. 

Thursday, January 30, 2020

World Migratory Bird Day: The film!

Well... not film, really. And I guarantee it's not Oscar-winning material. But I put together a little 4-minute video about my linocut process for the World Migratory Bird Day (WMBD) poster. Basically I propped up my phone, shot some footage, and taught myself how to use iMovie. (Thank goodness for YouTube tutorials!) Considering I put it all together in less than a day, I think it turned out okay!

Actually... working on it seemed to awaken some latent film-making-wannabe gene... but who has time to start a whole new career right now? I'll leave it to the experts, but I hope you enjoy this just the same.





Sunday, January 12, 2020

Linocut in Progress: Everything but the bird

It's a good thing I like blue, because there's been a heckuva lot of it going on in the studio for the last week and a half.

I entertained this vague hope that the next color pass on the water would be the final one, but, alas. T'was not so. But it was still satisfying to continue pushing the sense of depth by strengthening the foreground contrast.

It took me a couple of tries to get the dark right, and in the end I had a two-value blue blend across the entire block. Of course this was the one stage at which I forgot to take a photo of the ink rollout, so I can't show it to you. My bad.

Still.... it's looking pretty good, eh?

Reduction linocut in progress: Step 6

I'm rather irrationally happy about all those greeny blues in the background. It's a color palette that's new to me... a sure sign of the influence of my Maine surroundings.  And, hey! Lookie there. Can you finally see that there is, indeed, a bird in this image?

The problem I had at the conclusion of this step is that it was all just TOO blue. Yes, of course it's water and it's blue, but it all seemed a bit bright. One more color pass was in order, and it needed to accomplish the tasks of adding one more bit of oomph to the value contrast in the foreground, and cutting the overall brightness of the entire block.

This was a job for SOOP-er Neutrals.

Reduction linocut in progress, Step 7 rollup


At this point I didn't want to add much contrast to the background, so the upper 2/5 of the block was inked with a pale, transparent gray. The lower 3/5 got a transparent warm browny-black. Nary a blue in sight, because of course the colors already present would influence anything placed over them.... especially since the new inks are as transparent as the previous.

Step 7 printed, just the bird to finish!

Yes. That's it at last! The water is finished. I remain happy with the sparkly, bubbly feel, and the tonal gradation from background to foreground.

But there's still a tricky little bit to finish: the tern. A delicate touch is going to be needed to give it just the right amount of contrast. Too much will make it jump out of the environment, and will run the risk of the bird looking like a cutout. Also, if the bird is as dark as the foreground wave, it could flatten the feeling of depth in the entire image.

I really want to finish this now, but the ink is too wet to risk printing the tiny tern shapes. It's likely to need two days before I can safely tackle it.... ugh. Torment.

But in the meantime I have plenty to keep me occupied. The two biggest priorities are tax deadlines AND reviewing the videos for my online course. Did I mention I have plenty to keep me occupied?

Sunday, January 5, 2020

Linocut in Progress: In the pink!

Zooming right along... or perhaps, since the current linocut in progress is a seascape, I should say things are splashing right along. Whatever. Progress is being made.

It didn't take too long to get the block ready for the next color pass, as the first gray was really meant to show only as some subtle shadowing in the whitest bits of the wave, and the green is mostly under-color. But I wasn't ready to abandon that green yet, so for the next color pass I created a slightly darker and grayer version of it and blended that into a transparent blue-gray.


Step 2 rollup

Nice, eh? Very cheery colors to be printing in the winter.

Reduction linocut in progress, Step 2

It's all rather satisfying at this point, as it often is when I'm only two steps along. Now I really have to start thinking. Oh, dear.

As I work on this piece I'm interpreting a section of a (typically horrible) photograph. Most of these little white dots are the result of sun glare off the water, and around many of the larger spots in the foreground the camera lens created a sort of lavender aura. Hm. I wonder if I can suggest that in some subtle way....

Time to get out the pink! I rarely use pinks and reds... they just don't come up often in the sorts of images that I find most appealing. But deep in my ink stash I have an old tube of magenta.... let's give that a try. Why magenta? Because the color underneath it is blue, of course! And I am trying to get to lavender.

And oh, right. There's some gray here, too, blended alongside the pink to add another layer of value to everything else in the image.

Step 3 ink rollup. Transparent gray and magenta

Aaaannndddd..... success! I am pleased with the variety of hue and tone in the image so far. It's all rather pastel-y, which is an unusual palette for me, but that will change with the next color pass. For now it's more carving, a little bit of drying time, and a good amount of cogitating on what comes next.

Reduction linocut in progress, Step 3 printed


Thursday, January 2, 2020

Linocut in Progress: First of the New Year!

New Year's Eve on the coast of Maine was snowy, rainy, and icy- good weather for spending the day carving a new lino block. The image is one that I had started work on before I left Colorado at the end of 2017, but never got back to after the move. This new version is a little smaller than my first inclination... 12 x 12 inches... with a more intimate view of the water. (Because of course I have to start the year with a bird-and-water piece!)

Linocut in progress, first carving stage

With the intial carving stage complete, I was able to stumble downstairs on the first day of the new year and embark on my inaugural "pajama printing*" session of 2020. I started with a pale transparent "seafoam" green-to-gray blend.

(*What? You don't print in your pajamas? You should try it some time.)

First color pass: pale green to gray transparent blend

Not much of this color will remain in the final image, but hopefully the green will influence the colors that go on top of it in the ways I envision.

Inked block ready to print

This time of year in Maine we have that slanting sort of late afternoon light... pretty much all day. Nice, eh? But I digress...

Step1 printed, reduction linocut.

There are a lot of little tiny white bits in this image, but with the pale color pass it's not easy to sort out what's going on.  That will resolve itself as the piece progresses (at least I hope so), but for now there's not much to see.  Except a lovely drying rack full of fresh, new prints.


New year, new print!

There are a lot of other projects already underway in the new year, but I'm glad I spent the day with this one. Readers, I hope you all enjoyed a fine holiday season and are ready to (ahem) press ahead with joy and enthusiasm. I'm glad you're along for the adventure.

Monday, August 27, 2018

Linocut in Progress: A mask and muddle

Whew! I don't know about you, but hot weather just makes me move like I'm under water. I started this edition with 26 prints (I've already trashed one), but it seems like it takes forever to print each color pass. This morning I got through three NOVA programs on PBS before I finished printing, and that didn't include clean up.

But I'm ahead of myself.

Things continue to be a bit weird in the color department. If you've been following along you know that the first color pass was a transparent peachy color and the second was a transparent lavender. Which of course gave me a rosier peach. But I needed to start dragging this whole image back into the realm of blues, soooooooo... the third color pass was a transparent blue.

Reduction linocut in progress: Step 3

Which is why everything now looks a bit gray. In good light with good photography you might be able to tell that it is blueish-gray... but in this case you'll just have to take my word for it.

And now the trouble. I seriously need the next color pass to look blue... AND I need it to be a rather pale blue, no darker than the current overall value of the image. What the heck am I gonna do?

Had I taken the time early on to cut a fussy mask and confined the peachy color to small areas, getting a light blue would be easy. But I traded the tedium of cutting masks for the anxiety of balancing opaque and transparent inks. I'm not sure that I did myself a favor either way.

ANYWAY. I got out the white. And my leftover bits of transparent blue from the previous color pass. And a little more blue ink. And just because I didn't have a large enough pile of ink, I got out some more transparent base, too.

The good news/bad news about using white is that it's opaque. Using it will help reduce the influence of the previous color passes on the new one. But it's also... opaque. (Have I mentioned that?) It's not as luminous as a transparent ink, so it's going to influence the quality of every single color that comes after it.

Hm.

I decided to take a weird sort of middle-ground. I mixed leftover scraps of the previous transparent blue with a blob of white. This made a nice pale blue that was more opaque than not. It was also unpleasantly... chalky.

So I added more transparent base. This might seem counter-productive, since my purpose here is to put down a color that looks blue, but my hope was to reduce that icky flat quality of the white ink.

I also decided to keep the color entirely out of the body of the bird. (What? You didn't know there was going to be a bird? Clearly you have not been paying attention. Water + bird = typical Sherrie linocut.) This meant cutting a mask, but a much simpler one than I faced 'way back at the beginning. Here it is in place on the inked block:


And, boy. That block looks kinda opaque, doesn't it? (Did I mention that white ink is opaque?)

Fingers crossed, breath held, assorted printmaking gods invoked.... and....

Reduction linocut in progress: Step 4

It worked! The blue is perhaps not quite as pale as I might have liked (although it's lighter than it appears in the photo), but it is definitely blue and I can work with it. In fact I think the next layer is going to be back to another transparent blue, but this time I'll let it interact with the bird.

Naturally we've got two days of hot and humid ahead of us, so I don't expect to print before Thursday. But I'll get the carving done and maybe start playing around with another idea while these prints get to the correct stage of dryness.

Any guesses about bird species yet? North American birders worth their waterfowling salt ought to be able to figure it out. The cool thing? It's a bird found in both Maine and Colorado in the winter. (Although when they do turn up in Colorado, everyone gets their birding knickers in a twist.)

Wednesday, May 30, 2018

Repairs made, work begun!

The studio in coming together. Click image to embiggen.

There are a lot of reasons that I am happy that I moved to Maine, but at the top of my list right now is my new neighbor, Jeff. I shared my woes over my damaged press bed and he came right down to take a look. He felt we could manage a repair ourselves, and since I know him to be very handy (and experienced with construction and countertops), I figured we couldn't make things any worse and should give it a try.

A couple of days and a lot of stinky contact cement later... voila! We got the laminate re-adhered smoothly to the press bed and I am back in business.

There are still a few little quirks that developed in storage... mainly with one of the adjustment screws... but I jumped on in and printed some black-and-white images just to see where things were.

Happiness is linocuts on a drying rack.

Of course just because I haven't been able to print doesn't mean I haven't been working on other things... including the opening of an exhibition at the Green Lion Gallery in Bath.



I was tickled to find my piece, "Wild Dreams" facing the gallery entry door, and two small floral pieces adjoining the work of another local printmaker, Holly Berry. That's Holly in the middle, Martha Truscott on the left and some other slouch printmaker on the right.


Whew! It's suddenly summer time in Maine and things are hopping. Gallery shows, workshops, and field work are all vying for my time... and I'm still trying to get things functional in my living and working spaces. And I've had some company again, too!  It's starting to feel like a more normal sort of craziness, and I'm happy to be in the middle of it.

I'll be prepping some paper and getting started on a small reduction print in the next few days, although I expect to be interrupted by a high school graduation extravaganza and the annual Belfast Ukulele Picnic this weekend. Ukulele? Yes. That's a whole OTHER story.

Sunday, May 27, 2018

Girls in Science at Herring Gut Learning Center

It was my great pleasure this past week to work with the great staff at Herring Gut Learning Center to present their Girls in Science event.

Sixth grade girls from area schools spent their day learning from scientists and a certain natural history artist/illustrator you may know. (Ahem.) Guest speakers included a local kelp farmer, renewable energy and water quality experts, an algae curator, and... me.

The young scientists built wind machines, identified and handled different types of seaweed, fed baby lobsters, dissected squid, looked at phytoplankton under the microscope, and did some drawing and printmaking based on their observations. I spent two action-packed and fun days at Herring Gut, and enjoyed watching these young women exercising their curiosity and exploring possibilities.

Field sketching

Studying stones below the Marshall Point lighthouse

Printmaking!

Monday, April 16, 2018

From Battleships to Bird Art at the Camden Library

Hey, Maine peeps! This Thursday evening, April 19, I'll be giving at presentation at the Camden Library, 55 Main Street. Event is free and open to the public, so come on out!

"Dinner Party," reduction linocut, © Sherrie York

Sherrie York presents “From Battleships to Bird Art” as part of the Midcoast Maine Audubon lecture series on April 19, 2018, at 7:00 pm. The talk aligns with Maritime Month 2018 at Camden Public Library.  How did a material created for battleship flooring become a medium for bird art? Linoleum block prints, or linocuts, share their origins with naval ships, their process with woodcuts, and their history with artists from Picasso to Queen Elizabeth. Visually, linocut styles run the gamut from graphic social commentary to delicate floral, landscape, and wildlife images. 

Internationally recognized linocut printmaker Sherrie York will share her own linocut process, inspiration, and frequently bird-focused work. Her linocuts have been presented in national and international exhibitions, including the Woodson Art Museum’s prestigious “Birds in Art,” and the Society of Animal Artists’ “Art & the Animal,” and her work is represented in corporate and museum collections in the United States and abroad. She serves on the board of the Society of Animal Artists and is the Coordinator of the Audubon Artist Residency at Hog Island Audubon Camp in Bremen.

Friday, February 23, 2018

Young Printmakers at the Woodson Art Museum: Week Two

When we last left our printmaking heroine, she and her trusty sidekick, Woodson Art Museum Education Curator Catie Anderson, had just wrapped up a week that involved carving tools in the hands of 4th grade through adult learners. I'm delighted to report only one small bandaid required in a pool of 180 rookie carvers.

But for Week Two we put away the sharp implements and loaded up a travel crate with all the accoutrements required for an inky adventure. (Read: Many, many packages of hand wipes.) We were taking our print-and-pony show on the road!



The blocks the students carved the previous week were 4" x 4" in size. Their first step this week was to print their block four separate times on small sheets of paper. This gave them time to get a feel for the proper amount of ink and hand pressure to apply, and it provided four little prints that could be manipulated to determine a final design. Our goal was to print each individual block 4 times on a 10" x10" fabric square that would ultimately be assembled as a classroom wall hanging or quilt.


Once the students determined their 4-print pattern, they practiced printing on a larger sheet of paper.



5th graders with their larger repeated-pattern prints
Printmakers. All of them. And isn't this a spectacular art room?

Once they settled on their overall design, students printed their 4-up pattern one more time on to fabric squares. So satisfying.

Let's see... let's do some quick math. 150 students times at least 12 impressions of their blocks... that's a minimum of 1,800 print impressions in 5 days. Pretty. Darn. Awesome.

Plus I have to say that you haven't lived until you've prepped and cleaned up more than a dozen inking slabs and brayers over and over during a week. I owe so many thanks to Education Curator Catie Anderson for spending epic amounts of time at the sink, in addition to organizing our travel, coordinating with schools, gathering our supplies, providing amazing classroom input and backup, and lots of great conversation on the road. (Once she had enough coffee. ;-))

Finally, kudos once again to the entire Woodson Art Museum staff and all their members and volunteers. The museum is an amazing resource and it's clear how dedicated they are to supporting their community, its educators, and its students. It's always a privilege working with such an amazing organization, and I'm grateful for the opportunity to introduce printmaking to a wide audience. Let's do it again some time!

Linocut in Progress: Did You See That?

Put on your deerstalkers and get out your magnifying glasses, because we're back to trying to sleuth out the order of operations on this...